ASUS P4P800 E DELUXE SATA RAID DRIVER DOWNLOAD
Such opinions may not be accurate and they are to be used at your own risk. Thus the bios can “see” the drives. There’s no need to load the Fastrak’s bios if no drives are detected connected to the controller. But when I boot the machine I see the same situation as the old post. Thousands of users waiting to help! Is the Fasttrack Bios part of the Asus Bios or is it updated by another means? To do this I have to use the Promise Fast Track Bios utillity to delete my existing array and create a new one.
|Date Added:||20 March 2009|
|File Size:||54.90 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Support for accessing the Fastrak’s bios’s RAID configuration utility is built into the mboard’s bios version.
There’s no need to load the Fastrak’s bios if no drives are detected connected to the controller. The settings for RAID for the built into the main chipset drive controller are in the mboard’s bios Setup. But when I boot the machine I see the same situation as the old post. I doubt the message no bios installed is correct for diag use. The issue is either you didn’t use the setup saha to p4p8000 drives or raid or there is an issue with the drives physically or electrically in it’s attachment to the raid array.
Over a Month Ago Time Zone: Thats is WinXP see’s the array and all the data is there and it works fine.
What else could I try? I have tried re-installing the latest Asus bios using EZflash.
Asus P4PE Deluxe Intel Socket Motherboard Overview – CNET
P4PE Deluxe home support page http: Net cannot verify the validity of the statements made on this site. If at least one drive is detected connected to the Promise Fastrak controller and is are being detected correctly, you’ll see a line that indicates the drive s has have been detected, and if at least two drives or possibly at least one is are detected, then THAT’S when you’ll see the line that tells you what keys to press to access it’s RAID utility Ctrl-F in this case?
Use Question Form such as ” Why?
The Promise controller is the Fastrak controller. Net is the opinions of its users.
Pressing Ctrl-F any way does not get you in either. The old post was: The conclusion of the expert in the old post was that the drives were dead. If you want the operating system to be on the RAID array The information on Computing. If the Promise Fastrak controller is enabled in the mboard’s bios settings it probably is by defaultwhen you boot the computer you always see this first: Thus the bios can “see” the drives. Is the Fasttrack Bios part of the Asus Bios or is it updated by qsus means?
Would you use Snapchat filters on your dog? A Pit Bull is like a gun you can pet.
ASUS P4P800-E Deluxe….SATA II???
If you don’t respond to that within x 5? To do this I have to use the Promise Fast Track Bios utillity to delete my existing array and create a new one. And there is no safety on it. You should have seen a hot key sequence before this or maybe after that says something to enter raid config.
Net and its accuracy. Yes No I don’t have a dog. I would backup and restore to an external drive to keep the data. Thousands of users waiting to help!
Such opinions may not be accurate and they are to be used at your own risk.