HP DESKJET 5552 COLOR INKJET PRINTER DRIVER
Click the tab that provides paper type and size settings. Wait until the carriage is idle and silent before proceeding. Insert a new cartridge Follow these steps to insert a new cartridge. The product lights might flash and the carriage might move. Do not remove jammed paper at this stage.
|Date Added:||3 December 2015|
|File Size:||34.85 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Make sure that your product is in the Name drop-down list box, and then click Properties. Apply a moderate amount of pressure to remove any dust or dirt buildup.
Clean the paper rollers through the duplexer Gather the deskhet materials:.
HP Deskjet Standard Inkjet Printer | eBay
The Power light is on. Clean the rollers through the duplexer Follow these steps to remove the duplexer and then clean the paper rollers in the rear of the product.
Do not remove jammed paper at this stage. Open the top cover on the product. The carriage moves to the center of the product.
Solution Press the Resume button to eject the banner paper. Ddeskjet must disconnect the power cord to move the carriage mechanism by hand without the risk of printrr shock.
Remove and reinsert the cartridges Improper cartridge placement or installation might cause a carriage stall error. Open the duplexer door.
The Black Cartridge Problem icon. Lightly dampen a clean, lint-free cloth with bottled or distilled water, and then squeeze any excess liquid from the cloth.
Carefully remove any jammed paper or bits of torn paper from the rollers inside the duplexer. All lights are off. How to print a self-test report Make sure that plain white paper is loaded in the input tray. The Power light is on In this normal inkejt, the following light pattern displays on the product control panel:.
The following sections describe the most common combinations of blinking lights, followed by solutions for each combination. The Power light is on and the Resume light blinks In this error condition, the following light pattern displays on the product control panel:.
With the product turned ondisconnect the power cord from the rear of the product. The carriage might move to the center of the product. Wait for the carriage to move. Determine the cartridge issue. How does HP install software and gather data? The Power light is on and the Resume light blinks when trying to print on banner paper When trying to print on banner paper, the Power light is on and the Resume light blinks.
Carefully remove any jammed paper or bits of torn paper from the product. Lightly dampen a cotton swab moistened with bottled or distilled water, and then squeeze any excess liquid from the swab.
Blinking Lights on the HP Deskjet 5551 and 5552 Printers
Remove paper from the rear of the product. Plug the product directly into a wall outlet If the product connects to a power strip, try connecting the product directly to a wall outlet. The yellow arrow points to the Black Cartridge Low-ink icon.