Posted On
Posted By admin

LLIPush can be set to be enabled or disabled default. MSI-X support is required for Multiqueue. You need to log in to change this bug’s status. Auto-negotiation is disabled, and the AutoNeg parameter is ignored. Home directory not accessible: This issue is fixed in kernel version 2. The default behaviour of the driver previously assumed a static InterruptThrottleRate value of , providing a good fallback value for all traffic types, but lacking in small packet performance and latency.

Uploader: Goltikus
Date Added: 20 March 2010
File Size: 66.20 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 85733
Price: Free* [*Free Regsitration Required]

Linux Driver for Intel® Gigabit Network Connections

Build error with Asianux 3. Allows Phy to turn off in lower power states.

If a system based on the, or controller ogb connected to a hub, the Activity LED will blink for all network traffic present on the hub. To reduce the impact, the packet buffer sizes and relevant flow control settings are modified accordingly. The Linux base drivers support the 2.

Get IGB – IGB User’s Guide – Confluence

First identify your adapter. The hardware can handle many more small packets per second however, and for this reason an adaptive interrupt moderation algorithm was implemented.

Node 0-n 0 – n: This issue innstall fixed in kernel version 2. Then follow the appropriate steps for building, installing, and configuring the driver.


If, due to the nature of the issue you have encountered, you are unable instlal run this command, please add a comment stating that fact and change the bug status to ‘Confirmed’. This option allows for the ability of IEEE The user should run the Linux firmware kit from http: Changed in linux Ubuntu Utopic: The driver can limit the amount of interrupts per second that the adapter will generate for incoming packets.

If both Duplex and the link partner are set to auto-negotiate, the board auto-detects the correct duplex. Changed in linux Ubuntu: If you believe your system needs to disable this style of interrupt, the driver can be built and installed with the command: If the system is reporting dropped receives, this value may be set too high, causing the driver to run out of available receive descriptors.

Integrated Genome Browser

Apport bug-report Edit 1. As an example, if you install the e driver for two Gigabit adapters eth0 and eth1 and set the speed and duplex to 10full and half, add the following to modules. Enabling LLIPush may allow a denial of service attack.

When a spoofed packet is detected the PF driver will send the following message to the system log displayed by the “dmesg” command:. The default behaviour of the driver previously assumed a static InterruptThrottleRate value ofproviding a good fallback value for all traffic types, but lacking in small packet performance and latency. This results in unbalanced receive traffic. When this parameter is used, the Speed and Duplex parameters must not be specified.


The user can enable it at compile time to add support for LRO from the driver.

The install location listed above is the default location. It works by aggregating multiple incoming packets from a single stream into a larger buffer before they are passed higher up the networking stack, thus reducing the number of packets that have to be processed.

Linux* Base Drivers for Intel® Ethernet Network Connection

Then select the name of the specified base driver: It is most effective in an environment with many small transactions.

Package Find… Status Importance Invalid.

This parameter is not supported on the based adapter. This value coincides with the maximum Jumbo Instaall size of This enables the problematic power saving feature. This value delays the generation of transmit interrupts in units of 1.