Posted On
Posted By admin

Or make sure you get a good return policy. That warranty will vary depending on which brand you are purchasing, and we recommend that you visit the OEM website for exact specifications. Do not bring it near a watch, floppy disk, magnetic card, or CRT tube. No Replace the image transfer roller pressure solenoid. That release is also made during the envelope printing mode to reduce wrinkles. The switching arm 1 lowers and the paper is taken in by the mailbin.

Uploader: Kagagrel
Date Added: 20 September 2011
File Size: 53.73 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 33369
Price: Free* [*Free Regsitration Required]

The home position sensor did not come on in the 1. Do not forget to mount the reinforcement plate when reassembling the printer. Replace the image transfer belt.

Paper near empty sensor Detects when there are approximately 50 sheets remaining in the cassette. Please check back with us later to see if we have it in stock. Remove the 1 set screw for the multipurpose tray paper take-up solenoid. Properly secure the power cord connec- tions.

Any bin from 1 to 5 can be assigned as a dedicated bin. Remove the paper exit section 1.


konica, minolta, magicolor, 2200, toner, cartridges, minolta, qms, 2200, toner

Is the fusing unit floating? Store them in a place not exposed to direct sunlight.

Remove the 2 trays from the unit. There are maigcolor tabs. If a fatal error is detected in the engine, the paper transport motor will stop after the paper take-up roller has returned to the top position and the fusing pressure motor will stop after the pressure roller has been released.

For complete information maicolor see our Returns Policy. AmazonGlobal Ship Orders Internationally. Remove one plastic c-clip and the brushing bushing from the front side.

Tech support was virtually non-existent. C Fusing temperature control Controller circuit Thermistor 1 TH1 detects magicolkr surface temperature of the heat roller and sends a temperature signal to the CPU.

Remove the tabs for the belt cleaner release position sensor. Laser light is emitted, and printing starts in the main scan direction.

It has been mounted at the factory using a positioning jig to ensure that it is level. Remove the fusing fan motor 1. Klasse magicolot laser produkt der opfylder IEC sikkerheds kravene. We try to make the return process as easy as possible.


The leading edge of the paper is stopped at the fusing roller section. Remove the 2 connectors for the HV2 circuit board and 1 set screw.

Remove HV1 high-voltage circuit board 1.

: Customer reviews: Konica Minolta magicolor Color Laser Printer

Alexa Actionable Analytics for the Web. Impurities on fusing belt. Maggicolor the ozone fan motor M9 operate during power on initialization? Laptops by Dan Ackerman Sep 25, Is the fuse burned out in PU1 power supply circuit board? Be careful when removing this shaft because it also serves to secure the spring loaded transfer roller housing.

The blade-shaped gear is turned and the pressure roller is made to contact the fusing roller. Media Feeder Max Format. Minolta phone support wait times are not long either: